xTar MC6C Charger
CHF 36.90
Available, delivery time: 1-3 days
xTar MC6C Charger
With the MC6C, xTar brings an intelligent charger with six charging bays. Thanks to the large display, all the important information is easy to read at any time. The six bays are each monitored independently and charging stops automatically once the cell is fully charged. Its high conversion rate means charging is finished quickly, and the special three-stage charging process gently charges the cell for a longer battery life. The MC6C also generates little heat and, thanks to its fireproof and robust material, is a long-lasting companion. It can charge almost any cell type, from 18350 through 18650 to 26650 and more. What is special about the MC6C is that it can also bring deeply discharged cells back to life; a specific mode has been stored in the device for this. Vapers who are out and about a lot will be pleased, because the MC6C can be run not only from a mains adapter but also has a micro-USB port. That even makes charging from a power bank or a solar panel possible. Several safeguards have been built directly into the charger for safe operation: overvoltage protection, overcharge protection and further safeguards are on board. Incorrectly inserted cells are also recognised straight away by the MC6C and signalled by flashing. That way your loyal cells are well looked after and become long-lasting companions. xTar MC6C – look after your cells and you get more out of vaping. Details: dimensions: 140 mm x 128 mm x 31 mm. Charging method: TC/CC/CV. Charging voltage: max. 4.2 V. Charging current: DC 5 V / 3 A. Operating temperature: 0 to 40 °C. Cell types: 10440 | 14500 | 14650 | 16340 | 17335 | 17500 | 17670 | 18350 | 18500 | 18650 | 18700 | 20700 | 21700. Charge progress monitoring. Reverse polarity protection. Overcharge protection. 0 V activation function. Suitable for 3.6 V/3.7 V Li-ion/IMR/INR/ICR cells. Not suitable for protected 20700/21700 cells. Scope of delivery: 1x Queen ANT MC6C charger, 1x mains cable, 1x instruction manual.
Discover more from Xtar – further products in Other at Tabaknova.
| Colour: | Black |
|---|
Xtar
Login
Similar products
Make charging a pleasure. Clarity with style. That is what the little cube from xTar stands for. Built into the cube are 4 USB ports, three of them with a charging current of 1 A and one with a smart charging function and 2.4 A. All connections are gold-plated so that no current is lost. The xTar 4U itself is supplied via a 100 V–240 V AC cable, which is also practical when travelling. The connector here is nickel-plated. The cube's intelligent technology keeps it nice and cool while charging. Naturally xTar has built in numerous protection mechanisms here too to guarantee optimal safety: overvoltage protection and short-circuit protection are provided. And? Exactly: charging with style. Details: power input: 100 V–240 V AC. Output volts: 5 ~ 5.25 V. Output amps: 2.4 A / 1 A. Temperature: 0–45 °C. Weight: 93 g. Dimensions: L 62.5 x W 55 x H 28.3 mm. Scope of delivery: 1x 4U USB charger, 1x AC power cable, 1x instruction manual.Discover more from Xtar – further products in Other at Tabaknova.
Available, delivery time: 1-3 days
The MC4S is a compact charger for up to four cells, which are of course charged independently of one another. It makes no difference to the device whether the cells are of the same type. It recognises the cell type and charges each one in the optimal way. The device actively protects the cells against overvoltage, overcharging and short circuits. Revival mode: if a cell has been unused for too long and can no longer be recognised or charged by most devices, this charger can revive such a cell and then charge it. (With lithium-ion cells, however, caution is advised, as deeply discharged cells below 2.4 V can lose capacity and discharges below 1.5 V can become a potential hazard; as a precaution such cells should be handed in at a specialist shop for disposal. Note: rechargeable cells do not belong in battery disposal!) The charger has a three-stage charging cycle that is particularly gentle on the cells. Model designation: MC4S. Input: DC 5 V, 2.1 A. Power supply: USB C. Charging current: 2 x 1 A / 4 x 0.5 A. End voltage: 4.20 V±0.05 V. End current: ≤70 mA. Operating temperature: 0–40 °C. Dimensions: 100*97*26.5 mm. Weight: 95 g.Discover more from Xtar – further products in Other at Tabaknova.
Available, delivery time: 1-3 days
The xTar USB wall adapter is the ideal addition to the xTar chargers that come with a USB cable. The chargers can then be run at the correct power and voltage, which extends the life of the device. The adapter is made of tested, robust and fireproof material. Charging voltage: 5 volts. Charging current: 2.1 amps.Discover more from Xtar – further products in Other at Tabaknova.
Available, delivery time: 1-3 days
